Learn How to Make The Process of Overclocking the RAM of Your Computer

Posted on

You know what is overclocking? The process is nothing more than the Act of forcing a computer to run at a higher frequency than standard, generally to increase the performance of hardware. Of the components that can be adjusted, the CPU is the more common to receive this modification.

On the other hand, there are other ways to use the technique if you’re one of those people who like to tweak a little deeper into the computer.

Learn How to Make The Process of Overclocking the RAM of Your Computer

The RAM speed in recent years has almost tripled in frequency, which means that the performance can be improved dramatically in certain computer programs.

It is important to keep in mind, however, that the more you force your RAM frequency, the more the CPU will suffer from it. In other words, can mean a final minor performance oveclock to the capabilities of your computer.

On the other hand, the APUs of AMD, although a lower graphics solution, will benefit immensely from this increase in frequency.

So, what does it all mean? Learn the step-by-step:

 

1 – What’s the frequency?

Identify the frequency with the purchase of computer RAM is crucial. We do not advise you to buy any equipment with less than 1,600 MHz, which is the minimum for a computer aimed at gambling these days.

With Skylake and DDR4 appearing on the market, it is advisable to hold on a bit at the time of purchase and wait, considering the price of the next generation of memory that continues to grow.

 

2 – The profile setup

In the example, we used a couple of the Corsair Dominator memory kit Platinum, with the clock speed in 2, 133 MHz. To take advantage of any additional clock speed, you will need to adjust the memory with the correct profile in the installation. So, the options for this are XMP profiles of Intel or AMD AMP.

This is exactly what we will be using in the tutorial, just to make a little overclocking in memory.

 

3 – Increasing the frequency

Enter the BIOS of the computer. To do this is to just restart the PC and repeatedly press the delete key. Make sure your XMP profile or AMP is selected, and then change the frequency to a memory that is larger than the frequency of the memory that comes stock already selected from the manufacturer.

Generally, your RAM will be able to adjust and maintain this frequency you chose, regardless of what the standards say speed information.

 

4 – Above and beyond

If you want to take this customization beyond speed, this time change the BCLK frequency rather than adjust the multiplier RAM. You can do this in small increments, slowly.

However, this process also increases the basic CPU overclocking, so if you’ve done your chip increase as much as possible, it is unlikely that you can force the CPU memory even more.

Do the test with your computer and tell me if it worked. Although this tip is geared for gamers looking to get the most out of your computer in the middle of a gambling, anyone can follow this tutorial to improve your computer’s performance.